A password will be e-mailed to you.
HomeNeuroscience ShopRobotics2pcs nRF24L01+ 2.4GHz Wireless Transceiver Arduino Compatible

2pcs nRF24L01+ 2.4GHz Wireless Transceiver Arduino Compatible

Continue Shopping “16Hertz UNO R3 Ultimate Starter Kit – LED, LCD, Breadboard, Shield, Relay, 9V Adapter, Sensor, Guide for Arduino” has been added to your cart.
2pcs-nRF24L01-2.4GHz-Wireless-Transceiver-Arduino-Compatible-0
2pcs-nRF24L01-2.4GHz-Wireless-Transceiver-Arduino-Compatible-1

Category:

Pins are protected in anti-static foam and modules are in resealable packaging with Addicore nRF24L01+ product information card
Arduino and Raspberry Pi compatible
Several resources available online, such as tutorials, data sheets, and notes

Product Description

Product Contents:

– 2 pieces Addicore nRF24L01+ modules

– 1 piece pink anti-static foam protecting pins of modules

– 1 Addicore nRF24L01+ info card (includes pinout diagram)

– 1 4mil thick resealable clear plastic bag

Specifications:

– The Addicore nRF24L01+ is a 2.4GHz ISM band transceiver.

– Includes on board support components and a 2.4GHz antenna for easy implementation into designs without additional hardware.

– Communication range up to 329 feet (100 meters) in ideal conditions.

– A host microcontroller can communicate and configure the nRF24L01+ over a 4-pin Serial Peripheral Interface (SPI). The configuration registers are accessible through the SPI connection. Configurable parameters include frequency channel (125 selectable channels), output power, and data rate (data rates: 250kbps, 1Mbps, and 2Mbps).

– The on chip voltage regulator accepts supply voltages from 1.9 to 3.6V. When using the nRF24L01+ with an Arduino be sure to use the 3.3V output pin from the Arduino board to power the nRF24L01+ module.

– The module has 5V tolerant inputs which allows for direct connection of SPI pins to the Arduino.

– Ultra low power consumption as low as 11.3mA transmitting, 13.5 receiving at 2Mbps, 900nA in power down, and 26uA in standby.

– Internal filtering results in high margins of meeting RF regulatory standards. The module’s radio uses Gaussian Frequency-Shift Keying (GFSK) modulation as well as fast Automatic Gain Control (AGC).

– The module includes an Interrupt Request (IRQ) pin which can be used to wake the host microcontroller, (ex: Arduino), from sleep when the module receives a transmission providing great power conservation in battery devices.

– Auto-acknowledge and auto-retransmit.

Pins are protected in anti-static foam and modules are in resealable packaging with Addicore nRF24L01+ product information card
Arduino and Raspberry Pi compatible
Several resources available online, such as tutorials, data sheets, and notes
Auto-acknowledge and auto-retransmit
Applications: wireless peripherals, remote control systems such as RC vehicles and consumer remote electronics, wireless voice transmission such as VoIP, wireless sensor networks, wireless networks, home and commercial automation

Additional Information

Binding

Personal Computers

Brand

Addicore

EAN

0600954112691

EANList

0600954112691

ItemDimensions

50, hundredths-inches, 113, hundredths-inches, 56, hundredths-inches

Label

Addicore

Manufacturer

Addicore

Model

nRF24L01+

PackageDimensions

10, hundredths-inches, 250, hundredths-inches, 2, hundredths-pounds, 230, hundredths-inches

PackageQuantity
ProductGroup

PC Accessory

ProductTypeName

NETWORKING_DEVICE

Publisher

Addicore

Studio

Addicore

UPC

600954112691

UPCList

600954112691

Reviews

There are no reviews yet.

Be the first to review “2pcs nRF24L01+ 2.4GHz Wireless Transceiver Arduino Compatible”

Your email address will not be published. Required fields are marked *